Видео

Easily the best version of this drawer system build I've seen!

Way too abrasive my guy

No explanation, doesn't help at all

I'm right we're you are with woodworking but I've been doing it 45 years And yes I make mistakes as well but I don't have the equipment that you have and I'm disabled now I'm 63 and have been doing it since I was 15 off and on to start . Then full time after a while and you know what they say if you have a job you love you will never work a day in your life I've done framing , boxing and siding , and my love decks I found I could be real creative with those but now I'm in a 12 x 16 shed building bird houses and such and again I can get creative with them , but I'm not online because I don't want to be pushed by anyone to hurry up because they want it now I sell a few and give a lot away , and I can't hurry anymore because of my disability and some days i cant stand up long enough to get anything done but I have fun and to me that's what it is about

What is the overall height of the table?

@DanielDunlap great F ing video! Great way to keep the sawdust off all of the power tools usually stacked in that spot under the bench! and of course more space! One question for you and everyone, why the hell do people not put some finish on their drawers? I have watched a lot of these videos for ways to not use hardware and no one seems to varnish these cabinets and drawers. Maybe they do after and not on the video to save time.

It's called blushing

You can also control the environment you paint in with an ac

I want it!😃🕊

MUY BIEN HECHO, Y MUY PRACTICO.FELICIDADES

I liked your video, very helpful! No music or overly verbose talking, just showing how it's done - Getting ready to do this for the wife also... Thanks!

Nice..

Love it, awesome video, not trying to be a comedian, or funky music, just da business. great job

I have been looking to standardize my drawers throughout my shop. Not long ago I stumbled onto @HookedonWood. The only problem I am having with his drawer system is that it's metric. My brain just can't flip back and forth between the two. I am lucky as I don't currently have any cabinets built. Over the weekend I've been watching @JohnHeisz and his homemade drawer slides. I'm going to try them out for a Miter Saw Station cart I built from Brad @Fixthisbuildthat. There are two open areas at the top of the cart that would great to test them out. Any how, John Heisz has plans for a Large Tool Box using his homemade drawer slides. I plan to build two of those rather than stationary cabinets. My shop is is in a garage, and I like the flexibility of my tools being mobile. If I like them with the Miter Saw cart, I just might deploy them with the Large Tool Box. If I don't, then this will be the style. The main concern about the drawer system you used us humidity. I planned to use 1/2" MDF as my drawer bottoms. Which has me leaning towards the homemade drawer slides. Would love to know how your drawers are holding up.

👍🏾👍🏾👍🏾

you need new sawhorses

I would recommend placing smaller magnets along the backside of the little hinge and keeping a larger handheld one inside of that room in advance. That way you can close the hinge from inside. And simply using that small gap at the top left to push it open from inside so you don't trap yourself.

Is it me or are you cutting that backwards

Damn that was alot all at once!

I waited, I watched again and waited some more

I'm still waiting

Like the workmanship

liar

Great video! You’ve got a great set up! I like how it’s not flashy and not overloaded with every red or yellow cordless power tool on the market. Thanks

Do a real test, and leave them outside for a year. My opinion this was not any kind of a test for glues being resistant to weather.

i almost wanna say, just going at it with just your hand you can be more accurate as to how you sand, it just takes longer. But hey, sometimes that end result is worth the wait

Whats that long track youre clamping down for the circ cuts?

😂 some one wanted an excuse to laser cut sandpaper

I just used my scissors to cut pieces that fit....

I’ll stick with scissors to cut my Sandpaper

i could imagine how it went to sand a wood tray too so why even watch the video...

Nice tray! Those little sanding blocks are lit. Helped me out a few times. I believe they are gator brand.

It still does not fit in the cebter does it?

Baseboard only 5/8” short

Promo'SM 😋

I watched a man on a construction job die one day, using high pressure air to blow dust off his body. He had a small cut on his hand, an air bubble entered the cut and traveled to his heart and killed him on the spot. I do not know if that blower you was using would have enough pressure to be a problem or not, but why take a chance. May the Good Lord take a liking to you!!!

Can you tell me more about your table saw. I am looking for one. Thank you

This made building a set of pillars easy!

Excellent! Can you post a link to the hardware you used? Thx!

About a year ago, you built a hidden door. You used a hinge on the trim so you could open the door. I need to know the type of hinge you used on the trim. I have a similar situation and would like to install hinges on my trim. I can't identify the hinge from your video. Thanks.

Can you tell me what style hinge you used on the trim? I've looked at your video and can't figure it out.

I really enjoyed watching this video. Well done on the table. Looks fantastic! One thing I might ask is whether you wear ear protection and eye protection. I would recommend it. I'm about 60 years old and I'm suffering tinnitus and it's because I didn't use ear protection in my earlier days. Anyway, well done!!

Wait for what? 🤷

Loved the banter you came out with. I like the make, with your permission I’d like to make one for my bandsaw

I prefer videos with verbal instruction. But I did like this one.

In case you want to leave bread crumbs to your safe room!

Great video brother! I am gonna give it a try.

I miss doing these videos!

This is such an amazing idea!